Basic Receiving and Playing Operations
Basic Receiving and
Playing Operations
Playing Operations
Switching ON/OFF the TV set
In the manual, the OSD (on screen display) may be
different from your TV's because it is just an example to
help you with the TV operation.
Switching ON/OFF the TV set
First, connect power cord correctly and the power
indicator will light.
Press POWER on the remote control again.
If you want to exchange to standing by status,
please press down POWER on the remote control
Disconnect the power supply or unplug the
television if it is intended to completely cease the
television performance.
Choose the Menu Language
When you adjust your set for the first time, you must
select the language which will be used for displaying
menus and indications.
Press MENU and
/
Press
/
button to select language option and
then press OK to confirm.
Select a particular language by pressing
repeatedly.
When you satisfied with your choice, press MENU to
return to normal viewing.
Surround
Prog...
DTV Manu...
14 LED -LCD television Owner's Manual
to select Function menu.
/
Back light LED Four...
Intelligent
Net
Mode
Upgrade
Chinese
Choose the Input source
Change the picture source so you can watch your TV,
VCR, Cable , or any other devices that are connected to
your TV.
Press SOURCE button to enter the Input Source
menu and then use
desired items (ATV/DTV, AV1, AV2, Component, PC,
HDMI1, HDMI2, HDMI3).
Press OK button to confirm .
Picture Menu
The TV menu gives you an overview of the menus you
can select.
Note
❏
Depending on the input signal, one or more menu
items may not be selectable.
How to select picture mode
The picture mode provides the pre-defined images
settings: Standard, Mild, User, Dynamic and EyeGuard .
press
button on the remote control to select the
picture mode repeatly. Standard, Mild, User, Dynamic
and EyeGuard.
How to customize your own picture status
Press MENU button and then use
select Picture menu.
Press
/
button to select the desired items.,
press OK to enter its submenu.
Press
/
button to adjust the setting.
/
button to select the
/
button to