Cable Channel Designations; Connecting An External Device; Connecting Power; Using The Ac Power Cord - Optimus 16-429 Owner's Manual

9" color tv/vcr combo
Table of Contents

Advertisement

16-429.fm Page 13 Tuesday, July 20, 1999 3:50 PM

Cable Channel Designations

Your Model 36 can receive up to 125 cable chan-
nels, displayed as 1–125. Channels 2–13 are the
same for VHF and cable TV, and cable compa-
nies usually number them as they appear on the
TV screen. For other channels, the cable ser-
vice's channel designations might not match the
channel numbers that appear.
For more information, contact your cable com-
pany. You still might have to experiment to de-
termine the proper cable channel designations
for your cable system.
CONNECTING AN EXTERNAL
DEVICE
You can connect another audio/video device
that has audio/video outputs, such as a VCR,
camcorder, or satellite receiver, to the Model 36
so you can view the source's output on the Mod-
el 36.
Note: Always use video-quality shielded cables
with phono connectors. Do not use standard au-
dio patch cords.
To connect an audio/video device's outputs to
the Model 36, connect the device's video and
audio outputs to the corresponding
and
jacks on the front of the Model 36.
AUDIO IN
AUDIO IN VIDEO IN
Model 36
VIDEO IN
VIDEO
OUT
IN
AUDIO
A/V Device

CONNECTING POWER

Using the AC Power Cord

Warning: For your protection, the power cord
has a polarized plug. To prevent blade expo-
sure, be sure the blades fit fully and easily into
the outlet. If you do not have a polarized outlet,
have a qualified electrician install one before
you use the Model 36.
CAUTION:
TO
PREVENT
SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
Plug the supplied AC power cord's smaller end
into the Model 36's
AC 120V
plug the other end into a standard AC outlet.
DC13.2V
AC 120V
ANT.
AC 120V
1

Using the DC Adapter

To power the Model 36 from your vehicle's bat-
tery, plug the supplied DC adapter's small plug
into the Model 36's
DC 13.2V
the knurled ring on the DC adapter's large plug
and plug it into the vehicle's cigarette-lighter
socket.
To Cigarette-Lighter Socket
To Cigarette-Light Soc
DC13.2V
AC 120V
ANT.
DC13.2V
ELECTRIC
connector. Then
2
jack. Then tighten
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Model 36

Table of Contents