Keypads - Precor Elliptical Fitness Crosstrainer EFX 536i Assembly Manual

Keypads

Use the keypads to enter program selections and display
preferences.
Multiple keypads exist on the console display including a
navigational keypad in the center of the display, and a
PROGRAMS keypad.
Lower Display Keypad and the Selection Keys
User's Reference Manual: Display Console
Left selection key: Every time you press this key, the
display reflects the amount of time elapsed since you
began your exercise session, your time remaining, or your
estimated number of calories burned. An LED lights and
indicates which information is being displayed.
CROSSRAMP: Press and hold a CROSSRAMP key to
increase or decrease the force applied against your stride
from 1 to 20.
Ramp changes occur only when the foot pedals are in
motion. The number that appears on the display indicates
the selected CrossRamp setting, not the degree of
incline. There is not a one-to-one relationship between the
degree of incline and the percent of the CrossRamp
grade setting which appears in the lower display. The
setting affects the column height in the program profile.
Refer to the figure in More Information about the Upper
Display.
Changes to the ramp incline are not immediate. It takes
time for the lift to reach the target incline shown on the
display.
QUICKSTART: Press QUICKSTART to start your exercise
session immediately using the Manual Program. Refer to
Choosing QUICKSTART.
RESISTANCE: Press and hold a RESISTANCE key to
increase or decrease the force applied against your stride
from 1 to 20.
23