One-Touch Timer Recording (Otr) - Sylvania DVR91VG Owner's Manual

Video VR
DVD-RW DVD-RW
DVD-RW DVD-RW
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc has
enough space for the time you set.
After finishing the recording, the
recorder automatically goes into
standby.
First:
DVD
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
This operation may take a
while to be recognized.
2
Using [REC SPEED], select a
recording speed.
Refer to "Recording speed" on
page 5.
3
Using [CH K / L] or the Number
buttons, select a desired chan-
nel to record.
30
EN
Recording

One-touch Timer Recording (OTR)

4
DVD-R DVD-R
Press [REC/OTR] (DVD) repeat-
edly to select desired recording
time.
Recording times appear on the TV
screen (30 minutes to 8 hours).
Recording will start.
I 0:30
(Normal Recording)
8:00
When the unit reaches the
specified time, it will be turned off
automatically.
To change the recording length
during the One-touch Timer
Recording, press [REC/OTR] (DVD)
repeatedly until the desired length
appear.
To cancel the One-touch Timer
Recording within the specified
time, press [STOP C] .
This operation may take a
while to be completed.
XXXX
0:30
1:00
7:30
POWER OPEN/CLOSE
T-SET TIMER PROG.
.@/:
ABC DEF
1 2 3
CH
GHI JKL MNO
4 5 6
PQRS TUV WXYZ VIDEO/TV
7 8 9
DISPLAY SPACE CLEAR SETUP
0
TOP MENU MENU/LIST RETURN ENTER
REC/OTR VCR DVD REC/OTR
REC SPEED PLAY
2
x1.3/0.8 SKIP PAUSE SKIP
SLOW CM SKIP STOP SEARCH
DUBBING ZOOM AUDIO
Note
• The remaining recording
time will appear on the
display panel during a One-
touch Timer Recording.
Press [DISPLAY] to see it
on the TV screen.
• You cannot pause a One-
touch Timer Recording.
• Unlike a Timer Recording,
you can perform the following
operations during a One-
touch Timer Recording.
- Turning off the power
- Using [REC/OTR] (DVD)
and [STOP C]
• The unit will be turned off
automatically under the
following conditions.
1) No space remained on the
disc
2) When a power failure
occurs
• If OTR is finished in DVD
during playback or REC
mode in VCR, the DVD will
be in STOP mode and the
VCR keeps the current mode.
• When OTR is finished and
the power is turned off, the
unit will switch to the standby
mode automatically if a
Timer Recording has been
programmed. Press [T-SET]
to cancel the standby mode
for using the unit continuously.
3
4
4