Table of Contents
Advertisement
Step 4: Connect Ribbon Cables, Cabinet Wires and Power
Supply
Step 4-1: I/O Back Panel Introduction
PS/2 Keyboard and PS/2 Mouse Connector
PS/2 Mouse Connector
(6 pin Female)
PS/2 Keyboard Connector
(6 pin Female)
/
IEEE1394/ USB/ LAN Connector
IEEE1394*
USB 0
USB 1
* optional (only available up PCB
revision 2.1)
This connector supports standard PS/2
keyboard and PS/2 mouse.
LAN is fast Ethernet with 10/100Mbps speed.
Before you connect your device(s) into USB
connector(s), please make sure your device(s)
such as USB keyboard, mouse, scanner, zip,
LAN
speaker...etc. Have a standard USB interface.
USB 2
Also make sure your OS supports USB controller.
If your OS does not support USB controller, please
USB 3
contact OS vendor for possible patch or driver
upgrade. For more information please contact your
OS or device(s) vendors.
- 17 -
Hardware Installation Process
Hide quick links:
Advertisement
Table of Contents
