Audio Connectors - Fujitsu GA-8I848PM P4 Titan Series User Manual

Parallel Port, Serial Port and SPDIF (LPT/COMA/SPDIF)
Parallel Port
(25 pin Female)
SPDIF
USB / LAN Connector
LAN
USB 2
USB 3

Audio Connectors

Line In(Rear Speaker)
Line Out
(Front Speaker)
MIC In(Center and Subwoofer)
Method1:
Connect "Front Speaker" to "Line Out"
Connect "Rear Speaker" to "Line In"
Connect "Center and Subwoofer" to "MIC
Out".
GA-8I848PM(-FS) Motherboard
This connector supports 1 standard COM port
,1 Parallel port and 1 SPIDF. Device like printer
can be connected to Parallel port; mouse and
modem etc can be connected to Serial ports.
The SPDIF output is capable of providing digital
audio to external speakers or compressed AC3
data to an external Dolby Digital Decoder.
COMA
Serial Port
(9 pin Male)
LAN is fast Ethernet with 10/100 Mbps speed.
Before you connect your device(s) into USB
connector(s), please make sure your
device(s) such as USB keyboard,mouse,
scanner, zip, speaker..etc. Have a standard
USB interface. Also make sure your OS
supports USB controller.
If your OS does not support USB controller,
please contact OS vendor for possible patch
or driver upgrade. For more information
please contact your OS or device(s) vendors.
After install onboard audio driver, you may
connect speaker to Line Out jack, micro
phone to MIC In jack.
Device like CD-ROM , walkman etc can be
connected to Line-In jack.
Please note:
You are able to use 2-/4-/6- channel audio
feature by S/W selection.
If you want to enable 6-channel function, you
have 2 choose for hardware connection.
Method2:
- 14 -
You can refer to page 24, and contact your
nearest dealer for optional SUR_CEN cable.