Fujitsu Inverter Halcyon 9374379392-04 Operating Manual page 6

OPERATION
To set the operation mode
● Operation mode setting
● Room temperature setting
Lower Rise
● Fan speed setting
ECONOMY OPERATION
Room temperature sensor selection
● This function is locked at the factory. In order to detect the room temperature correctly, consult author-
ized service personnel when using this function.
Press the ECONOMY button for more than 2 seconds to se-
lect whether the room temperature is detected at the indoor
unit or the remote controller.
When the thermo sensor display appears, the room
temperature is detected at the remote controller.
NOTES
• If this function is locked, the location where the room temperature is detected cannot be changed and the
fl ashes when the ECONOMY button is pushed for 2 seconds or more.
En-5
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
AUTO COOL
Press the SET TEMP. buttons to set the room temperature.
Temperature setting range
AUTO ................................................ 64 to 88 °F
COOL/DRY ....................................... 64 to 88 °F
HEAT ................................................ 60 to 88 °F
Press the FAN button to set the fan speed.
AUTO HIGH
Press the ECONOMY button to start or stop ECONOMY OPERA-
TION.
For details on the function, refer to page 11.
DRY FAN HEAT
MED LOW QUIET
Indoor unit
mark