I/O Ports - ECS Z77H2-A3 User Manual

I/O Ports

1. PS/2 Combo port
Use the PS/2 combo port to connect the PS/2 Keyboard or PS/2 Mouse.
2. USB 2.0 Ports
Use the USB 2.0 ports to connect USB 2.0 devices.
3. VGA Port
Connect your monitor to the VGA port.
4. DVI Port (colay HDMI Port)
You can connect the display device to the DVI port.
5. USB 3.0 Ports
Use the USB 3.0 ports to connect USB 3.0 devices.
6. LAN Port
Connect an RJ-45 jack to the LAN port to connect your computer to the Network.
LAN LED
Activity LED
Link LED
7~12. Audio ports
Use the audio jacks to connect audio devices. No.10 port is for stereo line-in signal,
while No.12 port is for microphone in signal. This motherboard supports 8-channel
audio devices that correspond to No.7, No.8, No.9 and No.11 port respectively. In
addition, all of the 3 ports, No.8, No.9, and No.11 provide users with both right &
left channels individually. Users please refer to the following note for specific port
function definition.
The above port definition can be changed to audio input or audio output by
changing the driver utility setting.
6
Status Description
OFF No data
Orange blinking Active
OFF No link
Green Link
7: Center & Woofer 10: Line-in
11: Front Out
8: Back Surround
12: Mic_in Rear
9: Side Surround
Z77H2-A3 USER MANUAL
Link LED
LAN Port