How To Remove The Protective Screen - Pioneer Elite PRO-530HDI Operating Instructions Manual

HOW TO REMOVE THE PROTECTIVE
SCREEN
The protective screen is attached when the monitor is shipped to protect the display. We do not recommend that you remove it, but
if you have to remove it, do so following the procedure shown below.
If you decide remove the protective screen.
1. Remove the left, right, upper, and lower frame covers.
2. Remove the screws from the upper panel frame and side
panel frames. (Not remove the screw from the lower panel.)
Screw
3. While holding the screen in place, remove the upper panel
frame and side panel frames.
CAUTION:The panel frames are made of aluminum, so to
protect them from scratches, be extremely careful not to
strike them with the rim of the screen frame.
Side panel
frame (L)
Upper panel frame
Side panel
frame (L)
4. Remove the protective screen from the lower panel frame.
Protective
screen
5. Remove the screws from the lower panel frame.
Lower
panel frame
Screw
6. Reattach upper, lower and side panel frames as indicated
then follow on HOW TO ATTACH THE FRAME COVER.
<UPPER SIDE VIEW>
Panel frame
Protective screen
When the protective screen is
attached.
Side view
<UPPER SIDE VIEW>
Panel frame
When the protective screen is not
attached.
(Attach the panel frames reversed
as shown in the figure.)
11