Assembly
1
Fit the peg on one side of the cargo
tray into the hole in the tower base.
Press and "snap" the peg on the
opposite side of the tray into the other
hole in the base.
5
"Snap" the controller base into the
tower base, as shown.
2
"Snap" the control tower into the
tower base.
6
"Snap" the handle on to the post on
the controller base.
3
"Snap" the arm into the top of the
control tower.
7
Fit the long and short runways onto
the controller base, as shown.
Hint: The two runway pieces can be
removed for storage.
4
"Snap" the flags into the tower,
as shown.
Assembly is now complete!