Table of Contents
Advertisement
Basic Operations
POWER
To turn the unit ON and OFF:
1, Plug the power cord into an active AC power outlet,
2, Press the POWER
ON button
(on the remote
control)
to turn on the unit,
The monitor's POWER/STANDBY
indicator will light
up (green) when the unit is on,
3, Press the POWER OFF button (on the remote control
or the unit) to turn offthe unit,
The monitor's POWER/STANDBY
indicator turns red
and the standby mode is set (only when turning offthe
unit with the remote control),
VOLUME
To adjust the sound volume:
1, Press and hold the VOLUME I_ button (on the remote
control or the unit) to increase sound output to the
desired level.
2, Press and hold the VOLUME (_ button (on the remote
control or the unit) to decrease to the desired level.
DIGITAL ZOOM
Digital zoom specifies the picture position and enlarges
the picture.
1, Press the POINTER button to display the pointer, ( _, )
To change the size of the picture:
Press the ZOOM+ button and enlarge the picture.
The pointer will change to resemble a magnifying
glass, ( _ )
A press of the ZOOM- button will reduce the picture
and return it to its original size.
To change the picture position:
SeLect the position with the AV_I • buttons,
2, Press the POINTER
button
to delete the pointer.
MUTE
To cancel the sound:
Press the MUTE button on the remote control to cancel
the sound; press again to restore.
DISPLAY
To check the settings:
1, The screen changes each time the DISPLAY button is
pressed,
2, If the button
is not pressed
for approximately
three
seconds,
the indication
will disappear.
11
Advertisement
Table of Contents
