Recording A Still Image - Sony Handycam DCR-HC85 Operation Manual

Slide the POWER switch until the
CAMERA-TAPE lamp lights up.
Slide the POWER
switch while pressing
the green button
Press EASY.
The EASY lights np in blne.
Easy Handycam
operation
ON
5 Press RE(: START/STOP.
Recording starts. [RE(] appears on the
LCD screen and the Camera recording lamp
lights up. Press RE(: START/STOP again
to stop recording.
To turn the power off
Slide the POWER switch np to the OFF ((HG)
position.
To cancel EasyHandycamoperation
Press EASY again.
O Note
• You cannot ttun Easy Han@cam operation on or off
during:
Recording
USB Streaming
• Dining Easy Handycam operation, the following
buttons are not available.
LCD BACKLIGHT (p. 18)
BACK LIGHT (p. 37)
• During Easy Handycam operation, the settings of the
fimctions that are not displayed on the screen retlun
to their det:aults Previously made settings are
restored when you cancel Easy Handycam
operation.
Remove the lens cap. Pull the lens cap
string down and attach it to the grip
belt.
Press OPEN and open the LCD panel.
Slide the POWER switch repeatedly
until the CAMERA-MEMORY lamp
lights up.
\
?,TAPE - T CAMERA
_MEMOR¥ _
Sfide the POWER
switch while pressing
"'_/_'-_, the green button.
,I °_
: /
Press EASY.
The EASY lights np in blne.
Press and hold PHOTO lightly.
You will hear a light beeping sound when
the focus and brighmess settings are
adjusted. Recording does not start at this
point.
The indicator
stops flashing
The number of images
that can be recorded.*
*The mnnber of images that can be iecorded
varies depending on the image quality setting
and the recoiding environment.
/
o
N'
-_continued
Recording 35