Unpacking Your New Display - PROTRON PLTV-26 User Manual

PLTV-26 User's Manual.book Page 2 Wechlesday, April 20, 2005 3:55 PM
Unpacking Your New Display
Before using your new display, you should unpack
the contents of the box and check to make sure
everything is present and undamaged.
To unpack the display:
1. Set the box upright near the intended display
location.
2. Open the top set of flaps.
3. Remove the styrofoam pad from the top of the
display.
4. Remove the Accessories Box from behind the
display and set it aside.
5. Lift the display out of the box and set it aside.
The Accessories Box should contain the items
indicated below. If any items are missing or
damaged, contact the seller immediately.
/Accessories Box
Power Cord
VGA CabFe
Remote ControF \ \
\
PC Audio Cable
User's Manual
/ Coax-to-RCA /
Adapter
/
2 x AAA Battery