Table of Contents
Advertisement
When unpacking, check to make sure all the parts shown on the Parts List on page 13
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
ASSEMBLY AND OPERATING INSTRUCTIONS
For additional information regarding the parts listed in the
following pages, refer to the Assembly Diagram on page 13.
WARNING: DROWNING HAzARD; KEEP OUT OF SMALL CHILDREN'S REACH.
CAUTION! Always make sure the Pump (9) is disconnected from its
electrical outlet prior to assembling the Fountain, adding any water, or performing
service to the product.
Assembly Instructions:
NOTE: Assembly will require the assistance of another person.
1.
2.
Place the Bottom Stand (1) in the location where the Fountain is to be used.
(See Assy. Diagram.)
Attach the Vertical Stand (2) to the Bottom Stand (1). (See Assy. Diagram.)
3.
4.
Attach the Middle Stand (3) to the Vertical Stand (2) and Bottom Stand (1).
(See Assy. Diagram.)
For technical questions, please call 1-800-444-3353
SKU 93442
SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
V ~
Volts Alternating Current
A
Amperes
No Load Revolutions
no
xxxx/min.
per Minute (RPM)
UNPACKING
NOTE:
FIGURE E
PAGE 9
Advertisement
Table of Contents
