Cleaning And Inspection - Harbor Freight Tools 44894 Assembly And Operating Instructions Manual

To Operate the Stove:
Warning: Before operation, make sure the stove is on a flat, level surface capable of support-
ing weight of the stove and items to be heated.
1. As an alternative to using a match, an electric, solid, metal chimney, or other starter specifi-
cally made for lighting propane fueled stoves from a distance is recommended for use.
2. Place a lit match, or alternative starter device, next to the Burner (part #2).
3. To ignite the Burner (part #2), slightly open the Valve Handle (part #7).
4. Remove the starter device immediately after the Burner (part #2) ignites.
5. To shut off the Stove, turn the Valve Handle (part #7) sideways.
6. Allow sufficient time for Stove to completely cool before removing the LPG propane cylinder.
7. To remove the LPG propane cylinder, unscrew the canister from the Gas Valve Assembly
(part #5) in a counterclockwise direction.
To Store the Stove:
1. When not in use, the Stove should be stored and locked up in a dry location to inhibit rust.
Always allow sufficient time for the Stove to completely cool before storing. Keep out of reach
of children.
2. When storing, the LPG propane cylinder must be removed from the Stove. The LPG pro-
pane cylinder should be stored indoors in a well ventilated area above ground level.
3. Always make sure the Valve Handle (part #7) is in the "OFF" positon after each use to
prevent accidents.

CLEANING AND INSPECTION

NOTE: ALWAYS disconnect the LPG propane cylinder from the unit and allow the
Stove to completely cool before performing any cleaning, maintenance, or repair.
1. Clean with a damp cloth and mild detergent, and dry.
#44894 REV 02d Page 6