Table of Contents
Advertisement
5-SPEED DRILL PRESS
SEt uP anD OPERatIng InStRuctIOnS
Read this material before using this product.
Failure to do so can result in serious injury.
SaVE thIS ManuaL.
Copyright
1998 by Harbor Freight Tools
©
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Dia-
grams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may
differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10e
Model
Visit our website at: http://www.harborfreight.com
. All rights reserved. No portion of this manual or any artwork contained
®
38119
Advertisement
Table of Contents
Related Manuals for Central Machinery 38119
Summary of Contents for Central Machinery 38119
-
Page 1: Set Up And Operating Instructions
© ® herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Dia- grams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. -
Page 2: Table Of Contents
PuLLEY cOVER knOb ....11 aDjuStIng thE DRIVE bELt ..11 SEttIngS anD aDjuStMEntS 11 tO aDjuSt thE tabLE ....11 SEttIng thE REQuIRED angLE . 12 tO SEt DRILLIng DEPth ....12 SKU 38119 For technical questions, please call 1-800-444-3353. Page 2... -
Page 3: Important Safety Information
DON’T USE IN DANGEROUS not avoided, could result in ENVIRONMENT. Don’t use power death or serious injury. tools in damp or wet locations, or expose them to rain. Keep work area well lighted. SKU 38119 For technical questions, please call 1-800-444-3353. Page 3... - Page 4 WEAR PROPER APPAREL. Do or if the cutting tool is unintentionally not wear loose clothing, gloves, contacted. neckties, rings, bracelets, or other SKU 38119 For technical questions, please call 1-800-444-3353. Page 4...
-
Page 5: Drill Press Safety Warnings
These carry important safety that may affect its operation. A guard information. If unreadable or missing, or other part that is damaged should contact Harbor Freight Tools for a be properly repaired or replaced. replacement. DIRECTION OF FEED. Feed work Avoid unintentional starting. -
Page 6: Vibration Safety
InStRuctIOnS. to the hands, arms and shoulders. To reduce the risk of vibration-related injury: Anyone using vibrating tools regularly or for an extended period should SKU 38119 For technical questions, please call 1-800-444-3353. Page 6... -
Page 7: Grounding Instructions
Check with a qualified electrician or service personnel if the grounding instructions are not completely SKU 38119 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Unpacking
Remove all preservative lubricants from parts with a clean dry cloth. Some of the parts are heavy and may require two people for lifting. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353. The shipping box should contain: A. Table Assembly B. -
Page 9: Features
2” Table Size 6-5/16” x 6-1/2” Maximum Distance from Overall Dimensions 23” x 7” x 17” 6-3/4” Chuck to Table Base Size 7” x 11-1/8” E105017 Rev 99f, 07b, 10e SKU 38119 For technical questions, please call 1-800-444-3353. Page 9... -
Page 10: Assembly
6” of the spindle. Open the jaws of the chuck to their maximum, using the Chuck Key supplied. Put a piece of scrap wood on the table to protect the Chuck Nose. SKU 38119 For technical questions, please call 1-800-444-3353. Page 10... -
Page 11: Pulley Cover Knob
Loosening the table support locking handle (A), adjusting as desired, and re-tightening the handle; or, Loosening the Set Screw (B), tilting to the desired position (up to 45° in either direction), and tightening. REV 01b SKU 38119 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Setting The Required Angle
When the belts have been correctly positioned, tighten them by levering the motor away from the head until the belt deflects by approximately 1/2” at its center when REV10e SKU 38119 For technical questions, please call 1-800-444-3353. Page 12... -
Page 13: Drill Speed Table
Any tilting, twisting or shifting will result not only in a roughly drilled hole but also increases the chances of damage to the drill. SKU 38119 For technical questions, please call 1-800-444-3353. Page 13... -
Page 14: Cutting Speeds
Remove debris and drill bits from the machine. Thoroughly clean and dry all surfaces. Oil machined surfaces lightly. Child-proof the machine and work area. Use padlocks, master switches and/or remove starter keys. SKU 38119 For technical questions, please call 1-800-444-3353. Page 14... -
Page 15: Maintenance
When servicing, use only identical replacement parts. Use of any other parts will void the warranty. StORagE: Always remove and store drill bits. kEEP Out OF REach OF chILDREn troubleshooting SKU 38119 For technical questions, please call 1-800-444-3353. Page 15... -
Page 16: Parts Lists And Assembly Diagrams
Spacer 1302023 Pulley Insert 0802022A Retaining Ring 22mm GB894.1-86C Spindle Pulley 0805006D Hex Socket Set Screw GB80-85 Pan Head Screw M5 GB818-85B Cable Clamp 1502014A Foam Washer 0805009 REV 01d SKU 38119 For technical questions, please call 1-800-444-3353. Page 16... -
Page 17: Head Assembly
Feed Handle 0804005F Hex. Nut 3/8 Pinion Shaft 0804002E Hex. Nut M10 GB6171-86 Hex. Nut M8 GB6170-86C Pointer 0806002 Fit Set Screw M8 0802021 Power Cable 1302015F Ext. Lockwasher 5mm GB862.1-87 SKU 38119 For technical questions, please call 1-800-444-3353. Page 17... -
Page 18: Quill Assembly
Hex. Nut M4 GB6170-86 Hex. Hd. Screw 1/2” Pan Hd. Screw M5x20 GB818-85 Table 0801014 Hex. Nut M6 GB6170-86 Chuck 1303009 Collar 0803004 Retaining Ring GB894.1-86 Chuck Key 1303010 REV 01b SKU 38119 For technical questions, please call 1-800-444-3353. Page 18... -
Page 19: Limited 90 Day Warranty
LIMItED 90 DaY WaRRantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.