Advertisement
What Type of Vehicle
Do You Have?
6-Volt (Standard) Vehicle - Requires
one 6-volt battery and a 25 amp fuse or
one 6-volt battery with built-in thermal
fuse for operation. Has Type "H"
power system. See below for Wire
Harness Converter use instructions.
Super 6-Volt Vehicle - Requires one
6-volt battery with built-in thermal fuse
for operation. Can have either Type "A"
power system or Type "H" power
system with connector covers. See
below to identify the type of power
system your Super 6-Volt vehicle has
and for Wire Harness Converter
use instructions.
Wire Harness
Converter
H-Style
End
Six Volt (Standard) Vehicles
To use this charger with a
6-Volt (Standard) vehicle, you
must use the enclosed Wire
Harness Converter.
• Plug the H-Style end of the Wire
Harness Converter to your battery's
connector. The A-Style end of the
Wire Harness Converter will plug
into the A-Syle connector on your
new charger.
Using the Wire Harness Converter
A-Style
End
Type "A" Super 6-Volt Vehicles
If your Super 6-Volt vehicle
and battery have Type "A"
connectors as pictured here,
this charger is ready for use with your
vehice's power system. See page 4 for
Battery Charging instructions.
Type "H" Super 6-Volt
Vehicles Equipped With
Connector Covers
If your 6-volt battery and old
charger have Type "H" connec-
tors equipped with connector
covers as pictured here, you
must use the enclosed Wire Harness
Converter with this charger.
• Remove the connector cover from
your old charger and reassemble it
on the H-style end of the enclosed
Wire Harness Converter.
• Plug the end of the Wire Harness
Converter with Connector Cover to
your battery connector. The A-Style
end of the Wire Harness Converter
will plug into the A-Style connector
on your new charger.
IMPORTANT! If your Super 6-Volt
vehicle has a power system with
connectors other than the two
styles pictured above,
do not use this charger. Call
Power Wheels Consumer Affairs
at 1-800-348-0751 for further
information.
3
Advertisement
