Advertisement
Available languages
Available languages
Followthe stepsbelowto completehandleassembly:
A.
Pull upwardon the handle untilholesin lowerhandle (shown
in Figure3 deck cutaway)line up with holesin handle
bracket.See Figure4.
NOTE:Whenpullingupwardon handle,makesureto not pull handle
all the way out.
B.
bsert the T-boltsremovedin stepearlier throughthe handle
bracketsand lowerhandleand tightensecurelyto securethe
handlein place.See Figure4.
C. Reattachwing nutsand carriagebolts removedearlierinto
lowerholesof handleas shownin Figure5.
4.
The ropeguide is attachedto the right sideof the upper handle.
Loosenthe wingknobwhich securesthe rope guide.Referto
Figure6.
A.
Holdblade controlagainstupperhandle.
B.
Slowlypull starterrope handlefrom engineand slip starter
rope intothe rope guide.See Figure6.
C. Tightenropeguide wing knob.
D. Use cableties to secureblade controlcableto lowerhandle.
.,.
J
Figure5
f_
N_
Figure4
Figure6
9
Advertisement
