General Recommendations; Engine Maintenance; Spark Plug; Air Cleaner - Craftsman 247.370340 Operator's Manual

21" lawn mower
Hide thumbs Also See for 247.370340:
Table of Contents

Advertisement

Alwaysstop engine,disconnectsparkplug wire, andground againstengine
before performing anytype of maintenanceon your machine.
GENERAL RECOMMENDATIONS
Always observe safetyruleswhenperforminganymaintenance.
Thewarrantyonthislawnmowerdoesnotcoveritemsthat havebeen
subjected to operatorabuse or negligence. Toreceive full valuefrom
warranty, o peratormustmaintainthe equipment a s
instructed here.
Changing of engine-governed s peed will voidengine warranty.
All adjustments shouldbe checked a t leastonceeachseason.
Periodically c heck all fasteners andmakesurethesearetight.
ENGINE MAINTENANCE
SparkPlug
Forgoodperformance, the sparkplug mustbe properly gapped andfreeof
deposits. R eplace t he sparkplug annually.
1.
Disconnect the capfrom the sparkplug,andremove anydirt from the spark
plugarea.
2.
Use the propersizesparkplug wrench to remove the sparkplug.
NOTE: Replace w ith aChampion RJ2YXLE sparkplug.
3.
Check thegapwitha wiregauge. S eeFigure 15.Spark plug gapshouldbe
0.020in(0.51mm).If necessary, reset t he gap.
4.
Installandtightenthe sparkplugto the recommended t orque(180Ib-in [20
Nm]).
5.
Attachthe sparkplug capto the sparkplug.
Air Cleaner
Adirty air cleaner w ill restrictairflow to thecarburetorandcause poorengine
performance. Inspect t he filter eachtime the engineisoperated. Y ouwill needto
cleanthe filter morefrequentlyif youoperate the engineinverydustyareas.
Clean the air cleaner e very25hoursofoperationor oncea season. R eplace t he air
cleaner a nnually.
f
Electrode
Figure15
.J
f
Figure16
Neverstart or run the engine with the air cleanerassemblyor the air filter
removed.
NOTE: Donot usepressurized a iror solvents to cleanthe filter. Pressurized air can
damage thefilter andsolvents will dissolve the filter.
1.
Loosen the fastener t hat holdsthe coverandtilt plastichousing coveronside
ofenginedown.SeeFigure 16.
2.
Remove a ir filter from plastichousing cover.
3.
Toloosen debris,gentlytap the filter on a hardsurface. I f the filter is
excessively dirty, replace with a newfilter.
4.
Insertcover's tabsintoslotsinbottomof base.
5.
Tiltcoverup into placeandsecure with fastener.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents