Black Level Shift - Philips DVDQ50 Owner's Manual

16 TV
System
(NTSC/PAL),
Black Level Shift
TV System (NTSCIPAL)
Switch the NTSC/PAL setting of the DVD Player to match the
color system of your TV. Most TVs in the United States use the
NTSC color system. If your TV uses NTSC, set the DVD Player
to NTSC. Discs you play should have the same color system
(NTSC or PAL) that you chose for the DVD Player and TV. To
change the DVD Player's NTSC/PAL setting, follow these steps.
1
Press SYSTEM MENU. T,[, will be selected.
2
Press • to select {_, then press I_.
3
Press • repeatedly to select TV System, then press I_.
4
Press • or • to choose PAL, NTSC, or Auto. Choose Auto
only if your TV has both NTSC and PAL and you are using the
(CVBS) VIDEO OUT jack.
5
Press SYSTEM MENU to remove the menus.
You may need to turn off the DVD Player, then turn it on again,
before your NTSC/PAL changes take effect.
T_ RESUME FIS 11MESFJdICH
0000
QQQ
(DO(K)
Q(X) O
R k'ilJhl DISNAYDIM
S'ilP play pAba
0000
_T E_T SH_ S_
0@00
Black Level Shift
If you set the DVD Player to NTSC, set Black level shift to On.
This will improve the color contrast during Disc playback. Black
level shift has no effect if the DVD Player is set to PAL. To set
Black level shift to On, follow these steps.
1
Press SYSTEM MENU. T_, will be selected.
2
Press • to select (_, then press I_.
3
Press • to select Black level shift, then press I1%
Press • or • to select On or Off, then press OK.
4
Press SYSTEM MENU to remove the menu.
T-C ESUME FTS 11ES_U_I
O00O
O0O
O0(X)
OOQ