Connecting A Gas Dryer - GE Profile PTDN850GM0WW Owner's Manual And Installation Instructions

Installation Instructions
CONNECTING A GAS DRYER (skip for electric drgers)
TOOLS AND MATERIALS YOU WILL NEED
FOR CONNECTING THE GAS SUPPLY
O Flat- or straight-blade screwdriver (may be
needed for cord strain relief)
OFlexible stainless steel or plastic-coated brass
connecting tube (if allowed by building code)
OOpen-end wrenches for flexible tube and
connector
OAdjustable pliers (to adjust leveling legs)
OPipe wrench for holding dryer gas inlet while
attaching adapter elbow
OAdjustable wrenches (21for tightening
connections
t_Gloves
t_Safety glasses
FOR YOUR SAFETY:
AWARNING
Before beginning the installation, turn off the circuit
breaker(s) or remove the dryer's circuit fuse(s) at the
electrical box. Be sure the dryer cord is unplugged
from the wall.
Turn the dryer's gas shutoff valve in the supply line
to the OFF position.
Shutoff
Valve
Disconnect and discard old flexible gas connector
and ducting material.
17