Electrical Requirements - GE DBL333 Owner's Manual And Installation Instructions

Electrical requirements.
Read these instructions completely and carefully.
ElectricalConnection Informationfor ElectricDryers
I,'I/A _ IIII All _
Vllf/-Irl/ll/l/l/[./-- To reduce the risk
of fire, electric shock or personal ii_j ury:
° DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE.
• THIS APPLIANCE MUST BE PROPERLY GROUNDED.
Electrical Requirements
• This dryer must be connected to a 208V or
240V individual
branch
circuit, protected by
30 amp circuit breakers or time-delay fllses.
• Use copper condtlctors onlvi
Thisdryermustbe electrically groundedin
accordance with local codesand ordinances,or in
the absence of local codes,in accordance with the
NATIONALELECTRICAL C ODE,ANSI/NFPANO. 70.
• If the electric supply does not meet the above
specifications, call a licensed electrician,
NOTE:A wiring diagram is located inside the
control panel.
ElectricalConnection Informationfor GasDryers
WARNING- To,.ed,..e ,.i.¢
ot fire, electric shock or personal ii_jmT:
• DO NOT USE AN EXTENSION CORD OR AN
ADAPTER PLUG WITH THIS APPLIANCE.
• DO NOT UNDER ANY CIRCUMSTANCES, CUT OR
REMOVE THE THIRD GROUNDING PRONG FROM
THE POWER CORD.
This dryer must be electrically grounded in
accordance with local codes and ordinances, or in
the absence of local codes, in accordance with the
NATIONAL ELECTRICAL CODE, ANSI/NFPA NO. 70.
Electrical Requirements
• This dryer must be supplied with 120V, 60 Hz,
and c(mnected to an individual properly
grotmded branch circuit, protected
bv a 15 or
21) amp circuit breaker or time-delay fuse.
• If the electric supply provided does not
meet the above specifications, it is
recommended that a licensed electrician
External Ground(if required)
An external groundwire (not provided), which
meets local codes,may be addedby attaching it to
the green groundscrew on the roar of the dryer in
the upper left corner above the cord, and togrounded
metal cold water pipe or other established ground.
I'_ Attach ground w ire
| (obtain locally/
:U
o
NOTE:A wiring
diagram is located inside the
control panel.
install an approved outlet.
11