Download Print this page

Care And Cleaning - GE JES1142SF Owner's Manual

Hide thumbs Also See for JES1142SF:

Advertisement

Careand cleaning of the microwave oven.
CEA liancescem
Helpful Hints
An occasional
thorough
wiping with a solution
at baking
soda and water keeps the
inside fl'esh.
Unplug the cord before cleaning any part of this oven.
How to Clean the Inside
Walls,Floor,InsideWindow,Metal and PlasticPartsonthe Door
Some si)attex_ can be removed
with a paper
towel; othex_ may require
a damp cloth.
Remove greasy spattex_ with a sudsy cloth, then rinse with a damp
cloth. Do not tlse
abrasive
cleane_
or shaq_ utensils
on oven walls.
Toclean the surface of the door and the surface of the oven that come together upon
closing, use only mild, nonabrasive soaps or detergents using a sponge or soft cloth.
Rinse with a damp cloth and dry.
Never use a commercial oven cleaner on any part of your microwave.
Removable Turntableand Turntable Support
To prevent
breakage,
do not place the tin'arable
into water just atter cooking.
Wash it
careflflly in wam_, sudsy water or in the dishwasher:
The turntable
and sui)port
can be
broken
if dropped.
Remember;
do not operate
tile oven without
tile turntable
and
suI_port in place.
How to Clean the Outside
Do not use cleaners containing ammonia or alcohol on the microwave oven. Ammonia or
alcohol can damage the appearance of the microwave.
Case
Clean tile outside
of tile microwave
Mth a sudsy cloth. Rinse with a damp cloth and then
dry: Wipe tile window
clean with a damp
cloth.
Control Panel and Door
Wipe with a damp cloth. D_y thoroughly.
Do not use cleaning
sprays, large amounts
_ff
soap and water; abrasives
or shaq)
objects on the panel--they
can damage
it. Some paper
towels can also scratch the control
panel.
Door Surface
It is important
to keep tile area clean where
tile door seals against
tile microwave.
Use only
mild, non-abrasive
detergents
applied
with a clean sponge
or soft cloth. Rinse well.
Power Cord
If the cord becomes
soiled, tmi)lug
and wash with a damp
cloth. For stubborn
spots, sudsv
water nlav be used, but be certain
to rinse with a damp cloth and dry thoroughly
before
phlgging
cord into outlet.
Stainless Steel (on some models)
Do not use a steel-wood pad; it will scratch the surface.
To
clean
the
st:linless
steel
stlrfil('e,
rise
a hot,
dan/p
cloth
with
a illild
detergent
suitable
fin" stainless
steel suriilces.
Use a clean, hot, damp cloth to remove
soap. Dry with a dry,
clean cloth. Always scrub lightly in the direction
of the grain.
19

Advertisement

loading