Remote Control - Fisher PC-25S00, PC-27S90 Owner's Manual

Cable / Antenna Input
Terminal (75 ohms)
Audio/Video Input Jacks
Connect external video
equipment here (see page 9).
To familiarize yourself with this Remote Control, see page 6.
INSTALLING BATTERIES (2 AA not included)
1. Remove the battery cover by pressing the tab and tilting the cover upward. Insert
batteries. Make sure you match

remote control.

2. Replace battery cover. The remote control is ready!
Notes:
– Do not mix old batteries with new ones or mix dif-
ferent types of batteries together.
– Remove the batteries if the remote control will not
be used for a month or more. Weak batteries may
leak and cause damage. (Normal battery life is
roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be
recycled or disposed of pro-perly in compliance with all
applicable laws. For detailed information, contact your local
County Solid Waste Authority.
REAR PANEL
UHF/VHF/CATV
75Ω
REMOTE CONTROL
+
/ signs on the batteries with marks inside the
AUDIO
AUDIO VIDEO INPUT
OUTPUT
R L
AUDIO VIDEO
(MONO)
Audio Output Jacks (Fixed)
Connect external audio
equipment here (see page 9).
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
L
See page 9 before
connecting external
R
video equipment.
Cables are not
supplied for connect-
ing your external
equipment.
A solid Blue screen
with the word Video
displayed means that
the Video mode is
selected, but no
signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
Be sure batteries are
installed correctly.
Point the remote
control toward the
equipment you want
to control. Objects
between the remote
control and the
equipment may cause
misoperation of the
remote control
function.
5