GE Appliances DDE5700G Use And Care Manual page 12

The Problem Solver (continued)
PROBLEM POSSIBLE CAUSE AND REMEDY
WRINKLING IN
PERMANENT PRESS
AND "NO-IRON"
ITEMS (continued)
• Accumulation of lime scale due to use of carbonate detergents• If you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent•
• Failure to use fabric softener. Proper use of fabric softener will minimize wrinkling.
To remove wrinkles:
• Retumble on "Permanent Press" setting•
oRerinse and dry on "Permanent Press" setting•
• If unsuccessful, retumble on normal temperature for 10-12 minutes and hang
immediately.
• Iron carefully.
• Send to dry cleaners for pressing.
• Some wrinkles may remain which cannot be removed.*
*NOTE Ifyou follow good laundry procedures and Permanent Press clothes
still
come
out
wrinkled,
the finish may not be good quality. Also, in permanent press synthetie/
eotton blends, the eotton portion of the fabrie ean eventually wear away leaving only the
synthetie. Sinee it's the eotton portion whieh is treated for Permanent Press, a loss or
deerease of Permanent Press performanee will result.
If you need more help., call, toll free:
GE Answer Center ®
800.626.2000
consumer information service
12