Menu
Item
Shipping Condition
System Update
Software Licence
System Information
AV Colour System
Update
Postcode
System
Information
Auto Standby
Power Save
16:9 Overscan
Time Zone
DVI Input Setting
●
A different menu will be displayed while PC or SD Card is used.
●
Only available items can be selected.
Adjustments / Configurations (alternatives)
Resets all settings, for example, when moving house (p. 43)
Downloads new software to TV (p. 44)
●
This function does not work on TH-42LRG20E.
Displays the software licence information
Displays the system information of this TV
Selects optional colour system based on video signals in AV mode
(Auto / PAL / SECAM / M.NTSC / NTSC)
Performs the update of the GUIDE Plus+ schedule and advertising informations for
the GUIDE Plus+ system (p. 19)
Sets your postcode to display advertisements in the GUIDE Plus+ system (p. 19)
Displays the system information of the GUIDE Plus+ system
Sets the time the TV automatically goes to Standby mode when no operation is
performed for the selected times (Off / 2 / 4 hours)
●
Starting Timer Programming automatically does not affect this function.
●
Automatic input switching with the connected equipment affects this function and
time-count will be reset.
●
The notification message will appear 3 minutes before going to Standby mode.
Reduces brightness of picture to economise on power consumption (Off / On)
Selects the screen area displaying the image (Off / On)
On : Enlarged the image to hide the edge of the image.
Off : Displayed the image in the original size.
●
Set to "On" if noise is generated on the edge of the screen.
●
This function is available when aspect is set to Auto (16:9 signal only) or 16:9.
●
This function can be memorized separately for SD (Standard definition) and HD
(High definition) signals.
Adjusts the time data
●
The time data will be corrected based on GMT.
●
Set to "Auto" to adjust the time automatically according to your area.
Changes the black level in the image for HDMI input mode with DVI input signal
manually (Normal / Full)
●
When the DVI input signal from the external equipment, especially from PC, is
displayed, the black level may not be suitable. In this case, select "Full".
●
The black level for HDMI input signal will be adjusted automatically.
(p. 45, 47 and p. 49)
31