Panasonic P2HD AG-HPX255 Manual page 8

A Camera Remote Function Prepares the AG-HPX255 for Studio Use
New 10-pin Remote Terminal
A remote terminal is provided for
the optional AG-EC4G Extension
Control Unit. This enables camera
settings to be made and recording
to be controlled while watching the
monitor at the remote end.* This
handheld unit also supports studio
integration.
10-pin Cable (10m/50 )
Camera Image
Remote Control
AG-HPX255
*Only functions that are supported by the AG-HPX255 can be controlled.
High Resolution and High Brightness Color Viewfinder and LCD
High Resolution and High
Brightness Color Viewfinder
and LCD
The AG-HPX255/HPX250's color
EVF uses a 11.43 mm (0.45 inches),
approximately 1,226,000
dot-equivalent (852 x 480 x 3
[RGB]) LCOS (liquid crystal on
silicon) display panel. It delivers
bright, detailed, high-resolution
images and a high response speed.
High Resolution LCD Monitor
The AG-HPX255/HPX250's LCD
monitor has a 87.63 mm (3.45
inches), approximately
921,000-dot (1920 x 480) high-
resolution panel.
7
AG-HPX255 Remote Tterminal
VBS
AG-EC4G BT-LH910G
Extension Control Unit LCD Monitor etc.
LCOS Color EVF
Color LCD Monitor
AG-EC4G
Extension Control Unit
• Compatible camera recorders: AG-HPX255, AG-HPX370 series,
AG-HPX500 series, AG-HPX600, AJ-HPX3100G, AJ-PX5000
• The maximum length of the remote control cable is 50 m (164 feet).
• A 10 m (32 feet) remote cable is bundled.
• The AG-EC4G is both compact and light at 630 g (1.4 lb).
Control Functions
Camera Settings: Gain Up/Down, White Balance A/B/Preset Selection and
AWB/ABB Execution, Iris Auto/Manual Selection and
Adjustment, Master Pedestal, Painting,
Shutter SS/Fix/Off Selection and Speed Setting
Operation: Menu Operation, User Buttons (x3),
Rec/Play/FF/Rew/Rec Check
Monitor Output: Cam/Bar Select (linked to Auto Knee), Character On/Off
Specifications
Power Supply: DC 12 V
Power Consumption: 2.5 W
Weight: 630 g (1.4 lb)
Dimensions (WxHxD): 82 mm x 180 mm x 56 mm
(3-1/4 inches x 7-1/8 inches x 2-1/4 inches)
excluding knobs
Simplified Waveform and Vectorscope Display
The AG-HPX255/HPX250 have Waveform and Vectorscope Display
functions for the captured video signal on the LCD monitor.
Waveform
Other Functions
• White Balance Selector: Two values (A/B) memory and one value preset.
• ATW (Automatic Tracing White balance) function.
• Mode check: Displays a list of the camera settings on the viewfinder
and LCD monitor.
• Zebra: Select any two levels from among 50% to 109%, in 1% steps.
• Y-GET: Measures brightness at the screen center and displays precise
numerical data.
• Tally lamps: Provided on the unit's front and rear.
AG-HPX255 AG-HPX255
AG-HPX255/HPX250 AG-HPX255/HPX250
Vectorscope