Play Music; Transfer Music To The Player; Search For A Song; Change The Volume Level - Philips GoGEAR SA4DOT02 User Manual

4 Play music

Transfer music to the player

You can transfer music from your PC media
library to SOUNDDOT in the following ways:
Explorer;
Sync through Philips Songbird (see
'Sync with PC music library through
Philips Songbird' on page 10).
Explorer,
1
Connect SOUNDDOT to a PC.
2
On the PC, under My Computer or
Computer,
to SOUNDDOT.
Play music
1
Make sure that you have switched on the
player (see 'Switch the player on or off' on
page 7).
» The green indicator lights up. Music
play starts.
EN
8
» During music play, the green indicator
2
Press to pause or resume play.

Search for a song

Press and hold
previous or next song.
» One beep sounds.

Change the volume level

Press / .
» During music play, you hear the change
of volume level.
Volume reminder
SOUNDDOT can have you reminded when
the volume reaches a high level. To prevent
possible hearing damage, do not listen at high
volume levels for long periods.
1
To increase the volume, press
» When you reach the high volume level,
three beeps sound, and music play
stops.
2
To continue to increase the volume level,
press and hold
» Music play continues at the increased
volume level. You can continue to
increase the volume.
To exit, press
» Music play continues at the decreased
volume level.

Switch the random play on or off

1
During music play, press
» You hear two beeps. The green
» Songs play in random.
2
To switch off the random play, press
twice again.
» You hear one beep. The green indicator
/ to skip to the
.
until two beep sounds.
to decrease the volume.
twice.