Quick Start - Haier HLP140E User Manual

OPERATING INSTRUCTIONS

Quick Start

Normal , Heavy and Delicate Cycle Laundry Loads
3. Set Cycle and Start
To start drying a laundry load using Auto Dry with presets for Temperature and Time,
there are 3 easy steps:
Power
1. Turn 'Power ON'
On/Off
Start
3. Press 'Start'
Pause
Status
Dry
Cooling
End Cycle
Clean Filter
Dry
Time
Note
Normal , Heavy and Delicate Cycles are auto-set for Temperature and Time to dry a regular load.
Timed Dry Cycle is for manual selecting Dry times and Temperatures. (See next page for instructions)
4. Cooling Status.
When 'Cooling' Status LED is ON, the Cooling down time takes 10 minutes for dryer along with the
garments.
If you want to take out clothes in the middle of drying cycle, please use caution and carefully
take out the HOT clothes.
5. End Dry Cycle
A beeper alarm alerts you when the Drying Cycle ends, then the dryer will power down.
Take out the clothes as soon as possible.
6. Clean Filter
'Clean Filter' Status LED reminder goes ON. After drying each load of clothing, always clean
the lint filters.
Exhaust vent
Casing
150
A
Normal
120 U
T
O
Heavy
90
D
R
60 Delicate
Y
30 Timed Dry
Cycles Temp
2
2. Choose drying Cycle –
Normal, Heavy or Delicate
High
Low
Air-Dry
Start
Pause
3
14
Cycles
Power
On/Off
1