Epson ACTION T-1000 User Manual page 38

Selecting typestyles
In SelecType, each button has a function:
ON/OFF LINE
l
sets the styles.
FORM FEED
l
turns SelecType off.
LINE FEED
l
After turning on SelecType, follow these steps to select a typestyle:
1. Find the typestyle you want in the table below. All of the typestyles
listed in the table are available for draft mode. If you are in NLQ
mode, only emphasized and elite are available.
Mode
Emphasized
1
Double-strike
2
3 Condensed
4 Elite
2. Press the
ON/OFF LINE
mode column. Be sure that the printer beeps each time you press the
ON/OFF LINE
Press
3. the FORM FEED
4. Press
the LINE FEED
returns to its normal functions, but the printer is off line.
Press
5. the ON/OFF LINE
You can combine any of the modes listed in the above table when you
are in draft mode, except for emphasized and condensed. In NLQ, the
two available modes (emphasized and elite) may be combined.
If you wish to combine two modes, follow steps 1 through 3 above, then
return to step 1 and follow the entire sequence (steps 1 through 5). (Do
the same thing to combine three modes, but repeat steps
each of the first two modes you enter.) Always select the lowest mode
number first.
selects typestyles.
ABCDEFGHIJKLMnopqrstuvwxyz
ABCDEFGHIJKLMnopqrstuvwxyz
ABCDEFGHIJKLMnopqrstuvwxyz
ABCDEFGHIJKLMnopqrstuvwxyz
button the number of times indicated in the
button.
button to set the typestyle.
button to turn SelecType off. The control panel
button, and you are ready to print.
Typestyle
SelecType Operation
through 3 for
1
SelecType 2-3