First Alert 4800 User Manual page 75

Kind: Works with Enable Subcode, and when activated, has two options: Main
Bitrate and Subbitstream. Use this function to allow a lower network bit stream for
slower network connections or computers.
Signal Type: Dropdown menu (options: Video Stream and Multiplex Stream).
Encode Mode: Dropdown menu (option: Advance H.264).
Video Bitrate: Dropdown menu (options: Best, Good, Better, Normal, and
Customize). If you choose Customize, enter the desired value in Kbps in the field
to the right.
Frame Ratio: Dropdown menu (options: FULL and 1 to 25).
Resolution: Dropdown menu (options: DI, HDI, and CIF).
Brightness, Hue, Contrast, and Saturation: Adjust values on sliding scales
ranging from 1 to 16 (by default each of these values is set to 8).
The Channel window has a table for setting an event-driven scheduled recording (similar
to the Record Schedule function on the Record Tab of the DVR Main Menu). This is a
weekly recording schedule for various kinds of events Sunday through Saturday on a
24-hour basis. Week days are represented vertically and the hour line runs horizontally
from zero to 24 hours. One cell stands for one hour. Color-coded values denote situations
where the DVR will start recording:
Constant recording
Blue
Motion Record
Green
Alarm record
Red
Motion or alarm
Yellow
No recording
White
Recording full-time
Recording triggered by motion detection
Recording triggered by an alarm
Recording triggered by both alarm and motion detection
No recording performed during this time
Web Browser Operation
Model 4800 User's Manual