To Operate The Dvd System; To Play A Video Game; Quick Start - How To Get Going - Mazda DVD system User Manual

Quick Start — How to get going

To operate the DVD system:

1. Install two batteries into the remote control and 2 batteries into each
of the headphones.
2. Turn the ignition switch to the ACC or ON position.
3. Insert a DVD disc into the DVD player. The DVD player will turn on
and the DVD will start playing. When the DVD menu appears, press
the (PLAY) button to start viewing the movie.
4. To listen to the DVD on the vehicle's radio, turn the radio on.
5. Press and release the FM Transmitter ON/OFF button on the remote
control.
6. Press the FM TRANSMITTER SELECT button on the remote control
until 88.3 MHz is shown on the screen.
7. Tune the radio to 88.3 MHz. (Note: If 88.3 MHz is a local station, use
the FM TRANSMITTER SELECT button to select another frequency
and tune the radio to that frequency).
8. To listen to the DVD through the headphones, press and release the
"POWER" button on the headphones to turn the headphones on.

To play a video game:

1. Ensure that the audio and DVD system are on and vehicle ignition is
in the RUN or ACCESSORY position.
2. Connect the auxiliary device (i.e., game station, camcorder) to the
auxiliary input jacks located on the side of the unit.
Note: The AUX jacks are located under the black plastic cover on the
left side of the unit.
Yellow jack = video
Red jack = right audio
White jack = left audio
3. Press the SOURCE control on the right side panel or the remote to
enable the auxiliary inputs. AUX will appear in the LCD display.
Note: AV1 and AV2 are not utilized in this unit.
4. Turn the Headphones ON (control on left ear piece) to activate the
wireless headphones. Use the rotary dial on the right ear piece to
adjust the headphone volume.
2