Random Play; Program Play - Marantz CD Player User Manual

RANDOM PLAY

In this mode, the CD player automatically selects and plays tracks in
random order. All tracks are played once.
Press the button.
RANDOM
3 4 5 6 7 8 9 10
Random playback begins in about 4 seconds.
• During random playback, tracks are separated by an interval of about
4 seconds.
• The button can be pressed either during playback or in
RANDOM
stop mode.
If the button is pressed while the disc tray is open with a disc
RANDOM
on the tray, the disc tray automatically closes and random playback
begins.
• To stop random playback and resume normal playback:
Press the button again.
RANDOM
• If the button is pressed during random playback:
Each time one of these buttons is pressed, the CD player selects a
track at random and starts playing that track.
• If the or button is pressed during random playback:
Searching is carried out within the current track. The search operation
will not cross over into the previous or next track.
• To repeatedly play tracks at random:
Press the button once. All tracks are repeatedly played in
REPEAT
random order, with the order being changed each time the disc is
played.
NOTE
• A-B repeat playback is not available during random playback.
• When the button is pressed after the programming
RANDOM
operation (page 11) or delete programming operation (page 12),
random playback of the tracks selected with the programming or
delete programming operation starts.

PROGRAM PLAY

Programming (To play the desired tracks in a
certain order)
Programming when the display is in the time
display mode
If the loaded disc is a CD-TEXT disc, press the
it to the time display mode.
(Example: To program track No. 15 first, then track No. 7 in a 15-track disc)
TTL
1 2 3 4 5 6
1. Press the button in stop mode. The PROG indicator flashes.
PROG.
Flashes.
PROG
TTL
2. Specify the first track to be programmed using the numeric buttons or
the or button.
(Display example: The first programmed track is track number 15 with
a playing time of 4 minutes 30 seconds)
Flashes.
PROG
TTL TRK
3. Then program another track by repeating the procedure in step 2
above. Up to 30 tracks can be programmed in this way.
(Display example: The second programmed track is track No. 7 and
the total playing time of track Nos. 15 and 7 is 7 minutes 50 seconds.)
PROG
TTL TRK
Last programmed track
Total programmed tracks
4. After having programmed all the desired tracks, press the
button or button.
STOP
The PROG indicator status changes from flashing to continuously lit,
indicating that the program is completed.
Light up continuously
PROG
TTL
7
5. Press the button, The programmed tracks will be played in the
PLAY
programmed order.
11
button to switch
TIME
TTL TIME
7 8 9 10 11 12 13 14 15
TTL TIME
TTL TIME
15
Only the numbers of programmed
tracks light up.
TTL TIME
7 15
Total playing time of
programmed tracks
TTL TIME
15
PROG.