Removal steps of base cover assembly
Step
Screw (quantity)
1
M2 × 3 mm, wafer-head, nylon-coated (2)
2
M2 × 14 mm, wafer-head, nylon-coated (1)
Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds, including but not limited to
those described in this topic.
The following illustration shows the correct location of each label.
100
Hardware Maintenance Manual
Color
Torque
Silver
0.181 Nm
(1.85 kgf-cm)
Black
0.181 Nm
(1.85 kgf-cm)