Kenwood TK-2212 Instruction Manual page 12

1 Plug the AC adaptor cable into
the adaptor jack located on
the rear of the charger.
2 Plug the AC adaptor into an
AC outlet.
3 Slide the battery pack or a
transceiver with a battery pack
into the charger.
• Make sure the battery pack
contacts are in contact with
the charging terminals.
• The charger LED lights red
and charging begins.
4 When charging is completed,
the indicator lights green.
Remove the battery pack or
the transceiver with a battery
pack from the charger.
• It takes approximately 3 hours
to charge the battery pack.
5 Unplug the AC adaptor from
the AC outlet.
• When the charger will not be
used for a long time, unplug
the AC adaptor from the AC
outlet.
4