Advertisement
6. Setting Up Your MIDI Studio
A typical MIDI system setup might include your MIDISPORT 1x1, a computer with MIDI sequencing software, a MIDI controller
keyboard, and a MIDI-compatible sound module. This setup is illustrated below:
computer
In the set-up described above, MIDISPORT 1x1 is being used to route MIDI data between the controller keyboard, the sound module,
and the computer. To set up MIDISPORT 1x1 in this way:
1. Connect MIDISPORT 1x1 to your computer with the USB cable.
2. Connect your controller keyboard's MIDI output to the MIDI input of MIDISPORT 1x1.
3. Connect the MIDI output of MIDISPORT 1x1 to the MIDI input of your sound module.
4. Configure your MIDI sequencing software to send and receive MIDI signals from MIDISPORT 1x1. Consult your sequencing
software's documentation to learn how to do this.
Important note: MIDISPORT 1x1 is not a MIDI THRU device and data received at the MIDI in port is not sent directly to the MIDI
out port. It may be possible to route incoming MIDI input signals to the MIDI output through your MIDI sequencing software. Please
consult your software's documentation to learn how to do this.
Caution: Electrostatic discharges, electrical spikes, and Radio Frequency (RF) interference may cause MIDISPORT 1x1 to
malfunction. In such cases, unplug the unit, wait a few moments, and reconnect it to restore normal operation.
MIDISPORT 1x1 User Guide
sound module
MIDI keyboard
|
4
Hide quick links:
Advertisement
