Select Input Source; Basic Operation - Seiki LC40TZM Instruction Manual

Press MENU button to display the OSD menu as below:
Main menu
Picture
Audio
Time
Setup
Lock
Channel
Hint---you should operate the OSD menu according to the hint.
Use / button to select the main menu, and press
In the submenu, use
adjust/setup,or press
* (Press MENU button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
Press INPUT button on the TV set or remote control to display
input source menu, and use
0 !button on remote control to select the input source,
press OK button on the remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.
/ button to select the function item, press
button to enter the submenu.
CH / button on the TV set or
button to enter the submenu.
/
Submenu
(Setup menu
for example)
button to
17