Installing Batteries To The Remote Control; Connection Suggestions; If You Have Digital Cable Without Cable Box Or Antenna - Sceptre X42 User Manual

Installing Batteries to the Remote Control

Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-)
symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards,
re-attach the battery cover.
Please note:
•
Only use AAA batteries.
•
Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire
risk or lead to personal injury.
•
Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire
risk or lead to personal injury.
•
Dispose the batteries in accordance with local laws and regulations.
•
Keep the batteries away from children and pets.
•
If the remote control is not used for a long time, remove the batteries.
•
Keep the remote control away from moisture, sunlight, and high temperatures.
Connection

If You Have Digital Cable without Cable Box or Antenna...

1. Make sure the power of X42 LCD HDTV is turned off.
2. Connect the Coaxial RF cable from your antenna or digital cable to the TV port on
the back of your X42 LCD HDTV.
Suggestions
- 17 -
www.SCEPTRE.com
SCEPTRE X42 HDTV User Manual