Connecting Cable Or Satellite Boxes With Hdmi; Connecting To A Pc With Vga And 3.5 Mm Minijack - Sceptre X460 User Manual

Connecting Cable or Satellite boxes with HDMI...

1. Make sure the power of X460 LCD HDTV and your set-top box is turned off.
2. Connect a HDMI cable to the HDMI output of your set-top box and the other end to the
HDMI port on the back of your X460 LCD HDTV.
3. Turn on the X460 LCD HDTV and your set-top box.
4. Use the remote control's source button or the source button on the TV to switch to HDMI.
Please Note :
•
Please reference the set-top box's manual, to make sure the set-top box is
configured to output correctly to the TV.
•
Sceptre's X460 LCD HDTV supports SONY's universal remote code.
Please look up SONY's codes in your universal remote's hand book.

Connecting to a PC with VGA and 3.5 mm minijack ...

1. Make sure the power of X460 LCD HDTV and your PC is turned off.
2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the
other end to the VGA port on the back of your X460 LCD HDTV.
3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end
to the VGA Stereo Input port.
SCEPTRE X460 HDTV User Manual
- 22 -
www.SCEPTRE.com