Zoom A3 Operation Manual page 41

SlapBack This reverb creates a repeating echo effect.
Time
Page01
Sets the delay time.
F .B
Page02
Adjusts the feedback amount.
Level
Page03
Adjusts the output level.
HD Hall This is a dense hall reverb.
PreD
Adjusts the delay between input of
Page01
the original sound and start of the
reverb sound.
LoDMP
Page02
Adjusts low frequency damping in
reverb sound.
Plate This simulates a plate reverb.
PreD
Adjusts the delay between input of
Page01
the original sound and start of the
reverb sound.
Color
Page02
Adjusts the reverb time of the low
frequencies.
Tail
When ON, effect sound continues
Page03
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
[MIC]
Dyna 57 This simulates the sound of miking with a Shure SM57 .
Dist.
Page01
Sets the mic distance.
Page02
Cond 414 This simulates the sound of miking with an AKG C414.
Dist.
Page01
Sets the mic distance.
Page02
Cond 87 This simulates the sound of miking with a Neumann U87 .
Dist.
Page01
Sets the mic distance.
Page02
Knob1
0–1000 Decay
Sets the duration of the reverberations.
0–100 Tone
Adjusts the tone.
0–150 Tail
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Knob1
1–200 Decay
Sets the duration of the reverberations.
0–100 HiDMP
Adjusts high frequency damping in
reverb sound.
Knob1
1–200 Decay
Sets the duration of the reverberations.
0–100 LoDMP
Adjusts low frequency damping in
reverb sound.
OFF/ON Level
Adjusts the output level.
Knob1
On, Off Posi.
Sets the mic position.
Knob1
On, Off Posi.
Sets the mic position.
Knob1
On, Off Posi.
Sets the mic position.
Knob2
1–30 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–10 DRBal
Sets the ratio of delay and reverb.
OFF/ON
Knob2
0–100 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–100 Tail
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Knob2
0–100 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–100 HiDMP
Adjusts high frequency damping in
reverb sound.
0–150
Knob2
Hole, Brdg Level
Adjusts the output level.
Knob2
Hole, Brdg Level
Adjusts the output level.
Knob2
Hole, Brdg Level
Adjusts the output level.
Knob3
0–100
0–100
Knob3
0–100
OFF/ON
Knob3
0–100
0–100
Knob3
0–150
Knob3
0–150
Knob3
0–150
41