Sharp LC-32BD5T Service Manual page 15

FACTORY &ELECTRONIC ADJUSTMENT
2 2 2 2 - - - - Burning Burning:
Burning Burning
Embedded is a cycle of 8 R/G/B color signals(7
every 3 seconds.
Remark:
1. If electricity is cut-off during Burning, once electricity is restored,
Burning mode will resume.
2. Press the " Power " button on the Front Control Board to exit the Burning
mode.
3 3 3 3 - - - - Function Function Setting Setting: : : :
Function Function Setting Setting
Remark: This Function Reserved
4 4 4 4 - - - - Color Temp Color Temp Color Tempera Color Temp era erat t t t u u u u re: era
COLOR TEMP
0. DVI 1. RGB
3. 480P 4. 480I
R
6. 6500 3C9H 3D6H 3E5H
7. 9300 3D5H 3D7H 3E2H
8. 11000 3D9H 3D9H 3D5H
Note:
1. When adjusting the Color Temperatures, press number key "0", "1",
"2", "3", "4" and "5" on the remote control to select the LCD
input source that you would like to adjust, including DVI(HDMI),
RGB,1080I/720P, 480P, 480I and AV. When you press the number key to
select the input source that you would like to adjust Color Temperature,
the LCD set will switch to the to-be-adjusted input source mode
automatically.
2. Press number key "9" to "EXIT"
re: re: re:
ADJUST
2. 720P/1080I
5. AV
Bias
G B
th
color),with signals change
SELECT

9. EXIT
Gain
R G B
160H 135H 0F8H
148H 135H 114H
141H 132H 12AH
3-4
VER 1.0