Kogan KALED423DXZA User Manual page 10

Stand and wall- mounting instructions (optional)
Wall mounting instructions
Your LED TV is able to accommodate wall mounting with the use of a wall mount bracket
(not supplied with LED TV, please contact your local hardware store) and the mounting
holes on the back of the unit. We recommend removing the TV stand prior to wall mounting
the TV. Please see previous page for instructions on removing the stand.
Mounting instruction:
Your LCD TV is able to wall mounting with the use of a wall mounting bracket(not supplied with LCD
TV), and the mounting holes on the back of the unit. After detaching the stand:
1.Find the four mounting holes where you want to mount according to wall mounting bracket ③
and drill these four mounting holes on the wall.
2.Drive Nylon sleeves into the mounting holes on the wall tightly.
3.Fasten wall mounting bracket ③ on the Nylon sleeves with self-tapping screws ④;
4.Fasten screws ⑤ into the two screw holes on the rear cabinet;
5.Tighten bolt ⑦ on the bottom of the rear cabinet with screws ⑨,then put rubber gaskets ⑧ on
the bolt ⑦;
①.Wall
④.Self-tapping screw(4 piece)
(optional)
②.Nylon sleeve (4 piece)
⑤.Mounting Screw (2 piece) ⑥.Rear cabinet
Only for 42" model
9
③.Wall mounting bracket(1 piece)
⑦.Bolt
400mm