Table of Contents
Advertisement
Remote Control
Inserting batteries
1. Open the cover at the back of the remote control unit completely.
2. Insert two 1.5V AAA batteries, ensuring the polarities (+ / -) of the batteries are correctly
aligned and the batteries are properly pushed
into place so they can power the remote control unit.
3. Slide the cover back into position.
NOTE: When testing the remote control unit after replacing the batteries, make sure the TV is
properly connected to the mains power supply.
Precautions when using batteries
• Do not use old and new batteries together.
• Do not use different types of battery (for example, Manganese and Alkaline batteries)
together.
• Note that there are chargeable and non-chargeable batteries. Do not attempt to charge
non-chargeable batteries.
• Remove the batteries from the remote control unit if you do not intend to use the unit for
a long time.
• When disposing used batteries, follow any guidelines for recycling and disposal of
batteries that apply in your local area.
Using the remote control
To use the remote control, point it towards the remote sensor at the front of the television.
The remote control has a range of up to approximately five metres from the TV at an angle of
up to 30 degrees each to the right and left of the sensor. The remote control will not operate
if its path is blocked.
(Cont.)
Insert two AAA batteries.
9
Advertisement
Table of Contents
