Software Settings - Edirol PCR-M30 Owner's Manual

7
Connect the ▼ and ▲ symbols (which signify the outputs and inputs) of the
EDIROL PCR icon to those of the New External Device icon by using the
mouse to drag between them.
8
Close the Audio MIDI Setup.
Next, make software settings.

Software settings

1
Make MIDI device settings on your sequencer software.
For details on the PCR's input/output devices, refer to "Input / output
devices" (p. 43).
When using the PCR with your software
Before using the PCR with your software, please note the following points.
• Use the USB cable to connect the PCR to your computer before you start up your software.
• Do not disconnect the USB cable from the PCR while your software is running.
• Quit your software before you disconnect the USB cable from the PCR.
• Turn off the Sleep function of your Macintosh.
• The PCR will not operate in the Mac OS X Classic environment. Use the PCR when the Classic
environment is not running.
Use the mouse to
drag a connection
Getting Connected and Installing Drivers (Macintosh)
For details on MIDI device
settings, refer to the
owner's manual for the
software you are using.
31