Page 1
Jabra LINK™ 280 User manUal www.jabra.com...
Page 2
GN Netcom A/S. GN Netcom A/S assumes no responsibility or liability for any errors or inaccuracies that may appear in this user guide. Written and designed at GN Netcom A/S, Lautrupbjerg 7, 2750 Ballerup, Denmark, www.jabra.com.
Page 3
Thank you Thank you for purchasing the Jabra LINK™ 280 controller. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your controller. abouT your Jabra LInk 280 conTroLLer 1 QD Plug...
Page 4
To connecT conTroLLer To headseT Plug the QD to the QD of any Jabra GN corded headset. how To connecT conTroLLer To Pc Plug the USB plug into a free USB port on your PC. Once connected, the active mute and hookswitch buttons will be illuminated.
Page 5
To answer a caLL from your Pc sofTPhone When a softphone call arrives, you will hear a ring tone in the headset. If you are using a Jabra-supported softphone*, then answer by tapping on the hook-switch button on the USB controller; tap again to hang up when you are done.
Page 6
Please note the following as you work through the installation wizard: - Jabra PC Suite requires Microsoft .NET Runtime 3.5. If this is not already installed on your PC, then the setup program will automatically download and help you install it (requires an Internet connection).
Page 7
Jabra Pc suITe Programs After installing the software, you will have an All Programs > Jabra > Jabra PC Suite folder in your Windows Start menu. It provides links to the following programs: - Jabra Control Center Enables you to configure your controller from your PC.
Page 8
Firmware updates can sometimes improve the performance of your controller and/or add new features. Visit the Jabra web site to find out if firmware updates are available for any of your Jabra products. You will be able to download the updates from there as they become available.
Page 9
1. If you have not already done so, then attach your controller to your computer. 2. If you have not already done so, then download the firmware update from Jabra and save it on your hard disk or network in a location where you can see it from your computer.
Page 10
Use your phone’s controls to identify and select the “Jabra BIZ 2400” device. Your phone may also ask for the headset’s pass code. The pass code for all Jabra devices is 0000 (four zeros); if necessary, enter this code into your phone and commit the code (e.g., by pressing on an OK button).
- Go to the Control Panel on your computer. - Open the menu Sound and Audio devices. When inserted you can select the headset (It should appear as Jabra Link 280) as your default device for Sound playback and Recording. - Press Apply and then press OK.
Industry Canada approved the equipment. Bluetooth The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Jabra is under license. Other trademarks and trade names are those of their respective owners.