iRobot Verro 300 Owner's Manual page 22

Troubleshooting
Problem
Verro reverses
direction before
reaching end of pool
Verro waits too long
at side of pool before
changing direction
Verro does not
reverse direction
Verro is not
vacuuming well

iRobot Verro Owner's Manual
(cont...)
Likely Cause
The filter bag needs to
be cleaned
Time control dial is
not set properly
Flaps in the vacuum
intakes at bottom of
robot are blocked
Wheels or axles are not
turning freely
The pump impeller is
fouled by dirt or debris
The filter bag needs to
be cleaned
Time control dial is not
set properly
Flaps in the vaccum
intakes at bottom of
robot are blocked
Wheels or axles are not
turning freely
The pump impeller is
fouled by dirt or debris
The direction baffle is
impeded
The filter bag needs to
be cleaned
Flaps in the vacuum
intakes at bottom of
robot are blocked
The pump impeller is
fouled by dirt or debris
What to Do
Clean the filter bag. (p. 13)
Set the time control dial. (p. 12)
Check the flaps in the vacuum intakes.
(p. 20)
Check wheels and axles for dirt
and debris.
Clean the pump impeller. (p. 17)
Clean the filter bag. (p. 13)
Set the time control dial. (p. 12)
Check the flaps in the vacuum intakes.
(p. 20)
Check wheels and axles for dirt and debris.
Clean the pump impeller. (p. 17)
Check the direction baffle. (p. 20)
Clean the filter bag. (p. 13)
Check the flaps in the vacuum intakes.
(p. 20)
Clean the pump impeller. (p. 17)