Getting Started - iHome iW1 air series User Manual

Getting Started

Master Power Switch
The iW1 has a master power switch that is used to power the unit ON or OFF, help conserve battery life, and reset the iW1 speaker. In order
for the iW1 speaker to power ON, the battery must be charged or unit must be connected to a AC outlet.
Master Power ON - Slide the Master Power Switch
Master Power OFF - Slide the Master Power Switch
Note: If the iW1 is in the Master Power OFF state the iW1 will only allow charging of the iW1's internal battery and will not support
iPod/iPhone charging, remote control commands, AirPlay, network setup, nor Firmware Updates.
Powering your iW1 speaker ON
To power the iW1 speaker ON:
1. Plug AC adaptor into Charging
2. Place the iW1 Speaker on top of the
Master Power Switch
3. Slide the
Note: Allow 30 seconds for the speaker to startup before interacting with the iW1 speaker.
4. Press the Power button to switch between power ON and Standby mode.
The iW1 speaker will power ON to the last state.
1
outlet
12V
Rechargeable Battery
The iW1 speaker has an internal rechargeable battery and supports audio playback any where in the home when the battery is charged or
docked on it's charging base with an AC adaptor.
To Charge the Battery:
AC adaptor Charging
1. Plug into
2. Dock iW1 Speaker on top of
Note: Allow up to 10 hours to fully charge the iW1's battery.
To view the Battery level status:
Press the Battery Preview
battery power
off | on
English
to the ON position (on rear panel) to activate your iW1 speaker.
to the OFF position to power the iW1 speaker OFF.
Base, and plug into a live AC wall outlet.
Charging Base.
to the ON position (on rear panel).
2
Base, and plug into a live AC wall outlet.
Charging Base.
button to view the charge status of the iW1's internal battery on the top volume control panel.
battery power aux-in reset status network setup
iPod dock
off | on
power
off | on
3
battery power reset status network setup
aux-in iPod dock
off | on
power
battery
off | on
30s for startup
Battery Level Preview
Current battery status level will show in place of volume level
Status LED
OFF when battery is fully charged
Red, solid when battery is charging
Red, blinking when battery needs charging
6