Summary of Contents for Humminbird SC 110 Autopilot
- Page 1 SC 110 Autopilot SC 110 Autopilot Installation and Operations Manual Installation and Operations Manual 531760 3_A...
- Page 3 ®...
- Page 8 Inserting the Wires into the Terminated Block Inserting the Wires into the Terminated Block...
- Page 10 ®...
- Page 11 ttaching the Bracket...
- Page 12 Control Head Configuration...
- Page 13 AUTO STANDBY TURN TRACK...
- Page 15 ® AUTO TURN TRACK...
- Page 16 Section 4, Compass Settings...
- Page 17 ® Menu Description Settings Language Sets the language for English: English the display. Italiano: Italian Francais: French Español: Spanish Deutsch: German Default: English Units – Speed Sets the units of kts: knots measure for speed mph: miles per hour readouts. km/h: kilometers per hour Default: kts Units –...
- Page 18 Menu Description Settings Feedback Slack Sets the allowable .5° to 3.0° tolerance or dead Where .5 = tighter response to band before the rudder feedback, and 3.0 = system will respond looser response to rudder to changes in feedback. feedback. Reduces servo jitter or chatter.
- Page 19 Standby mode automatically. Be prepared to manually control the vessel. Default: Enabled Magnetic Compass Sets the compass FXC110: Humminbird® FXC110 Type model connected to HRS1: Humminbird® HRS1 the autopilot CPU. Default: FXC110 Compass Alignment Adjusts the electronic -30°...
- Page 20 Menu Description Settings NAV2 Function Sets the function of Disabled: O the equipment Nav2: Chartplotter (#2) connected to NAV2 in Wind: Wind Sensor the CPU. Default: Wind Course Timeout Sets the amount of Disabled: O time (in seconds) 10s to 120s before the o course Default: 30s (30 seconds) alarm will begin to...
- Page 21 Menu Description Settings Multisensor Enables or Disables Enabled: On the Multisensor mode Disabled: Off (Fluxgate compass, Default: Disabled GPS, and Gyronav). Gyronav sensor must also be connected and enabled. Gyronav Enables or Disables Enabled: On the Gyronav Disabled: Off connected to the Default: Enabled CPU.
- Page 22 Manage Control Head Settings: Change the utopilot Settings Control Head Configuration: Start Installation Mode...
- Page 24 Manage Control Head Settings: Switch the ctive Compass Compass Model Confirm Installation Mode Settings Humminbird® FXC 110 and Magnetic Compass Type = FXC110 Gyronav® rate sensor Gyronav = Enabled Humminbird® HRS1 Magnetic Compass Type = HRS1 GyroCompass Expansion Card – GyroCompass Type =...
- Page 26 Test 3: Compass utomatic Compensation and Readout Confirmation...
- Page 29 Control Head Configuration: Input Installation Settings...
- Page 31 Navigate with the utopilot Targeting Targeting...
- Page 33 Control Head Configuration: Input Installation Settings...
- Page 35 Control Head Configuration larms larms...
- Page 37 larms larms larms...
- Page 38 Multisensor Technology...
- Page 40 Multisensor Technology...
- Page 41 Dodge...
- Page 43 Control Head Configuration: Operating Parameters Wizard Manage Control Head Settings: Change utopilot Settings Control Head Configuration: Input Installation Settings...
- Page 44 TURN...
- Page 45 humminbird.com...
- Page 47 Dodge Control Head Configuration: Start Installation Mode...
- Page 48 Control Head Configuration Wind Display Control Head Configuration...
- Page 49 25° 25° 30° 30° Tack Valid Valid Tack Tack 90° 90° Valid Valid 120° 120° Gybe Gybe Gybe 150° 150° 155° 155°...
- Page 50 AUTO STANDBY TURN TRACK...
- Page 53 Control Head Configuration: Compass settings...
- Page 54 Control Head Configuration...
- Page 55 Control Head Configuration: Operating Parameters Wizard...
- Page 56 Menu Description Settings Sets how far the vessel can deviate from 1 to 9 a course. Increase the setting to allow for Default = 3 more deviation from the course, and decrease the setting to keep the vessel closer to the selected course. Rudder Adjusts the rudder e ciency.
- Page 58 Control Head Configuration...
- Page 59 Icon Alarm Text Description Solution No Compass Compass signal lost Check compass installation and connection to the CPU. No Gyrocompass Gyrocompass signal Check compass and lost Gyrocompass installation and connection to the CPU. No Gyronav Gyronav signal lost Check Gyronav installation and connection to the CPU.
- Page 60 No Route Input The autopilot is See Navigate with waiting for the next Humminbird® MFD for chartplotter more information. command or Check the connection of chartplotter input the chartplotter to the lost.
-
Page 63: Contact Humminbird
Contact Humminbird® 1 800 633 1468 service@humminbird.com Humminbird...