Parts And Controls; Initial Mower Setup; Adjust The Handlebar - Honda HRX217HZA Owner's Manual

PARTS AND CONTROLS

KEY SWITCH
(P. 9)
GRASS
(P. 6)
BAG
OIL FILLER CAP
(P. 4)
CUTTING HEIGHT
(P. 6)
ADJUSTMENT LEVER (4)
HANDLEBAR
BATTERY BOX
(P. 14)
RECOIL STARTER GRIP
SPARK PLUG CAP
(P. 13)
CUTTING HEIGHT
ADJUSTMENT
CARBURETOR
(P. 6)
LEVER (4)
FUEL VALVE ON
(P. 9)
SHIFT LEVER
THROTTLE LEVER
DISCHARGE GUARD
FUEL TANK CAP
MUFFLER
BLADE CONTROL
BLADE CONTROL
BUTTON
(P. 8)
LEVER
HANDLEBAR
ADJUST KNOB
(P. 3)
(2)
CLIP DIRECTOR®
(P. 5)
KNOB
AIR CLEANER
(P. 12)
FUEL VALVE OFF

INITIAL MOWER SETUP

List of Parts
With help from an assistant, carefully remove the mower and loose
(P. 8)
parts from the carton and compare the loose parts against the
following list. Contact the authorized Honda dealer from whom you
(P. 5)
purchased the mower if any of the loose parts shown are not included
with your mower.
Ref. No.



(P. 8)

Adjust the Handlebar

1. With the handlebar adjust knobs in the unlocked position, raise
the handlebar into the mowing position.
DRIVE
CLUTCH
LEVER
(P. 8)
2. Align the adjust knobs with one of the three holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock
position, making sure both sides are positioned at the same
height.
4. Remove all the cardboard from around the handlebar.
Description
Grass bag frame
Grass bag
Engine oil, key, and owner's manual


Qty.
1
1
1

HANDLEBAR ADJUST
KNOBS
LOCKED
UNLOCKED
3