Table of Contents
Advertisement
If necessary, rewind the rope and
pull again. If the engine does not
start after several attempts, refer to
TAKING CARE OF
UNEXPECTED PROBLEMS,
p.
66
.
Exposed moving parts can
cause injury.
Do not operate the
outboard motor without
the engine cover.
Use extreme care when
installing the engine
cover.
6.
If the choke control was used to
start the engine, return the control
to the normal operating position as
the engine warms up.
During the warm-up period, check
the oil pressure indicator (p.
and cooling system indicator (p.
18
).
7.
Install the engine cover (p.
and lock it in place by locking the
engine cover lock lever.
8.
If it was necessary to remove the
emergency stop switch lanyard
from you to perform the
emergency starting procedure, be
sure the lanyard is attached
securely to operator before
18
),
operating the outboard motor.
9.
Have your closest authorized
Honda Marine dealer check your
43
),
system and correct the problem, so
you can use the recoil starter.
OPERATION
31
Advertisement
Table of Contents
